5 Inch Wireless Car Backup Camera System with worldwide universal car license plate frame screw hole mounted backup camera PVS-598PWLS
- The wireless built-in backup camera can be powered from the reverse lights, which will be used when reversing. The camera can be easily mounted on the License Plate without covering any information. The monitor can be mounted to the windshield or on the dash. The monitor can be easily powered either through the cigarette lighter or from the fuse box/ignition switch.
- IP68 waterproof rated with the integration of LED light, which supplies clear HD Color. With its light sensor, the LED lights only turn on when the car is in the dark environment, such as at night or in the outdoor garage without any lights. Super night vision MCCD chip brings full color image both at day and night. It comes with default gridline, which can be turned off by cutting off the white wire loop.
- Press the ‘MENU’ button directly, to switch the channels. Hold down the ‘MENU’ button to enter into the setting interface. You can change the brightness, contrast, saturation, tint, language, and mode of the monitor.
- Instant Real-time Video transmission. Wireless range 82ft-100ft on an open empty area. However, we only recommend to use on vehicles less than 23ft for NO INTERFERENCE, such as cars, SUVs, Minivans, UTVs, etc.
5 INCH MONITOR SPECIFICATION
Pixel resolution: 800*480 Pixels
Brightness: 200 CD/m2
NTSC/PAL System Auto Switching
Built-in 2.4Ghz Wireless Video Receiver
Dimensions (W*H*D): 5.5*4.7*0.6 Inch
Power Voltage: 12-24V DC
Power Output: 150mW
REAR/FRONT VIEW CAMERA SPECIFICATION
Image sensor: 1/3” PC4089K MCCD
Signal type: CVBS
Waterproof Rating: IP68
TV System: NTSC/PAL
Resolution: 550 TV Lines
Pixels Array: 728*480 Pixels
Minimum illumination: 0 Lux ( LED backlights ON triggered by photoresistance)
Video Output: 1.0V±0.5Vp-p 75Ω
S/N Ratio: better that 48db
White Balance: Auto
Power Voltage: 12-24V
Current Consumption: 400mA
1 x 5 inch LCD Monitor
1 x Worldwide universal car license plate screw hole mounted wireless backup camera
1 x Power cable
1 x Cigarette Lighter Adapter with on/off switch
1 x User Manual
Q: How to choose the video signal output type of MCCD chip between CVBS and AHD?
A: CVBS signal is only for non-AHD monitor such as 5 inch, 7 inch or 9 inch monitor of 800*480 pixels resolution, AHD signal is only for AHD monitor which is of 1024*600 pixels resolution. CVBS camera CAN’T be displayed on AHD monitor, and AHD camera CAN’T be displayed on non-AHD monitor.
Q: How to clarify the AHD monitor and non-AHD monitor of the origin GPS navigation screen already included in your car?
A: Depends on the picture resolution of it. AHD monitor is of 1024*600 pixels of resolution, and non-AHD monitor is 800*480 pixels or lower.
Payment Term: T/T，PAYPAL
Product Number: PVS-598PWLS